Savage guys- single shot follower

[Dusty Stevens]

i need a single shot follower. I stay mixed up on the many models they have had over the years. Its i think a 12fv (heavy fluted 308 with laminated stock) it has what appears to be a center feed blind magazine. I want a follower that fits into the action without regards to the magazine- this will be going into a br stock so solid bottom and no magazine inlet. Score hi which is who i use for remingtons say no center feed.

 

[Jdne5b]

One reviewer says it fit his centerfeed.

https://www.midwayusa.com/product/1...ington-243-winchester-308-winchester-aluminum

You could also take the AI mag sled, mill it down and bed it in the action/stock.

 

[JFrank]

i need a single shot follower. I stay mixed up on the many models they have had over the years. Its i think a 12fv (heavy fluted 308 with laminated stock) it has what appears to be a center feed blind magazine. I want a follower that fits into the action without regards to the magazine- this will be going into a br stock so solid bottom and no magazine inlet. Score hi which is who i use for remingtons say no center feed.

SSS has the best one in stock, had mine in two days. you will need to remove the metal shroud from the stock from there you can retain the spring or remove and JB weld the follower in place

 

[Dusty Stevens]

How bout no magazine even in the equation? Im putting this into a br stock. No magazine cutout is even going to be there. I need to put the follower in the action out of the stock and have it fill the cutout in the action like a solid bottom single shot would be

 

[Dusty Stevens]

And is SSS even open? Another thread sounds like they cant get a response

 

[Jdne5b]

The Score High also says it wont fit the mag box. You wont be using the mag box. I'd call score high and see if they'll confirm.

 

[JFrank]

How bout no magazine even in the equation? Im putting this into a br stock. No magazine cutout is even going to be there. I need to put the follower in the action out of the stock and have it fill the cutout in the action like a solid bottom single shot would be

It ends up being nice and flush, great fit clicks right in.
Send Lisa an E mail with what you want and a phone number she will probably call you the next morning. $20 ish

 

[Pawnee Bill]

I sent my Savage to Greg Tannel and had him fit one of his single shot round bottom followers and epoxied it in. As close to solid bottom as you can get.

 

[Peebles24]

How bout no magazine even in the equation? Im putting this into a br stock. No magazine cutout is even going to be there. I need to put the follower in the action out of the stock and have it fill the cutout in the action like a solid bottom single shot would be

I would think seeing as how you will use no magazine any 308 single shot plate that you can bed the stock for will work. Obviously you will have to attach it to the action then inlet the stock to fit. I actually considered doing this exact thing myself but couldnt find a stock preinlet for a 10/12 in a reasonable timeframe, cost, finish,and br style. I ended up ordering the boyd atone and im making bag riders for front and rear out of 1/2" aluminum. I will just continue to use my SSS single shot dbm adapter.

 

[rckendall]

It ends up being nice and flush, great fit clicks right in.
Send Lisa an E mail with what you want and a phone number she will probably call you the next morning. $20 ish

This was my experience also, about a year ago.

 

[chop house]

How bout no magazine even in the equation? Im putting this into a br stock.

personally, what i have done is cut a longitudinal section of pvc pipe that fits just under the lip of the bolt guides. works for me, but feeding for you may depend on bullet style and seating length.

 

[Mark W]

How bout no magazine even in the equation? Im putting this into a br stock. No magazine cutout is even going to be there. I need to put the follower in the action out of the stock and have it fill the cutout in the action like a solid bottom single shot would be

Sounds like you’re looking for something like this. I got this one from forum member andrewsben with the pictured action. I’m not positive but it looks like a 3D printed unit.

 

[#40Fan]

Yep, that is 3D printed. I have made my own as well.

 

[Charles]

i need a single shot follower. I stay mixed up on the many models they have had over the years. Its i think a 12fv (heavy fluted 308 with laminated stock) it has what appears to be a center feed blind magazine. I want a follower that fits into the action without regards to the magazine- this will be going into a br stock so solid bottom and no magazine inlet. Score hi which is who i use for remingtons say no center feed.

I think i have a couple of these will check this afternoon, have used them in the 110 actions with blind mag.

 

[Charles]

after seeing picture above that's what i have let me know if you want it i will get it off tomorrow

 

[Dusty Stevens]

Sounds like you’re looking for something like this. I got this one from forum member andrewsben with the pictured action. I’m not positive but it looks like a 3D printed unit.

View attachment 1063903 View attachment 1063904

That is exactly what im lookin for

 

[MikeMcCasland]

That is exactly what im lookin for

Same here; if you find somebody selling the 3D printed followers, please post it here.

 

[Dusty Stevens]

Looks like a task that our very own @urbanrifleman can handle

 

[Charles]

Sending it out now if it doesn't work modify it or keep it,good luck

 

[MikeMcCasland]

Does anyone have the 3d printer file for one of these in a long action? Long shot I know, but I have a buddy with a 3d printer that can make me one if I can find the file.