RCBS FL Bushing die for 6.5 PRC

Discussion in '6mm, 6.5mm, and .25 Cal (Not 6BR)' started by Ironworker, Oct 18, 2019.

  1. Ironworker

    Ironworker Silver $$ Contributor

    Joined:
    May 10, 2006
    Messages:
    958
    Just received dies for my 6.5 prc ,I don't have any loaded ammo. What size bushing should I order ? Unfired new brass measures .290.
     
  2. Ironworker

    Ironworker Silver $$ Contributor

    Joined:
    May 10, 2006
    Messages:
    958
    Neck wall thickness is .015x2=.030+.264=.294-.001=.293 is that correct ?
     
  3. DDRH65PRC

    DDRH65PRC

    Joined:
    Sep 19, 2018
    Messages:
    88
    Depends what brass you're gonna use. With ADG, I used .292" or .293"

    Measure your wall neck thickness with a anvil based micrometer to find out
     
    Ironworker likes this.
  4. Ironworker

    Ironworker Silver $$ Contributor

    Joined:
    May 10, 2006
    Messages:
    958
    I ordered a .292 ,that's all that was in stock.
     
  5. Ironworker

    Ironworker Silver $$ Contributor

    Joined:
    May 10, 2006
    Messages:
    958
    I did measure with a neck wall Mic that RCBS sells .
     

Share This Page