Problem with 1911 9mm extractor

Discussion in 'Gun Project Questions & Gunsmithing' started by josebd, May 25, 2019.

  1. josebd

    josebd Silver $$ Contributor

    Joined:
    Oct 17, 2009
    Messages:
    751
    Got a new bullet proof extractor for my rock island 1911 9mm,it says pretty much drop in ,I couldn’t even get any pressure on a round I slide up to it,tried bending,filed down the pad a little still no help.the hook wasn’t even close?
     
  2. PatMiles

    PatMiles Gold $$ Contributor

    Joined:
    Feb 29, 2016
    Messages:
    1,158
    Did you order the correct caliber, there is a difference.
     
  3. josebd

    josebd Silver $$ Contributor

    Joined:
    Oct 17, 2009
    Messages:
    751
    Yes I did
     
  4. DirtySteve

    DirtySteve Gold $$ Contributor

    Joined:
    Jan 22, 2017
    Messages:
    773
    Set it side beside the one you took out and compare them. Just because you ordered the right one does not mean they sent the right one..
     
    jonkeil243 likes this.
  5. josebd

    josebd Silver $$ Contributor

    Joined:
    Oct 17, 2009
    Messages:
    751
    It is the right one
     
  6. Bill K

    Bill K Silver $$ Contributor

    Joined:
    Oct 16, 2011
    Messages:
    396
    If it matches the original one, then something else is wrong, spring, etc. not back in place when you reassembled or something.
     

Share This Page