Peterson 308 SRP for FTR

Discussion in 'Big Stuff -- 6.5mm, 7mm, 30 Cal' started by Boatschool02, Nov 9, 2018.

  1. Boatschool02

    Boatschool02 Silver $$ Contributor

    Joined:
    Apr 9, 2016
    Messages:
    227
    I read all of the search results for "Peterson 308."
    Has anyone gone 10+ firings with 185/200s on the Peterson small primer brass yet?
    Thoughts? Comparisons? Feedback?
    Thanks in advance,
    Luke
     
  2. raptor1ronin

    raptor1ronin

    Joined:
    Jun 9, 2014
    Messages:
    254
    I’m on #3 love it so far.
     
  3. Ktmracer358

    Ktmracer358

    Joined:
    Jan 15, 2017
    Messages:
    26
    Not much help but I have 3 firings on mine shooting 175s and they are still very tight.
     
  4. mike06

    mike06

    Joined:
    Oct 3, 2010
    Messages:
    108
    25 so far I do anneal 308 SRP no splits primer pockets still tight. 175 Nosler CC and RDF
     
  5. XTR

    XTR

    Joined:
    May 15, 2011
    Messages:
    3,447
    Peterson SRP 308 brass has only been on the market for about a yr. Because most F-TR shooters will buy 500 to 1000 cases (or more) at a time probably nobody has the kind of numbers you are asking about with competition loads.
     
  6. Boatschool02

    Boatschool02 Silver $$ Contributor

    Joined:
    Apr 9, 2016
    Messages:
    227
    Thanks for the feedback.
     
  7. Perk

    Perk perk Gold $$ Contributor

    Joined:
    Mar 13, 2009
    Messages:
    63
    Is there an advantage to the SRM brass? I am putting a 6.5 creedmoor barrel on a savage, I have been looking at the Peterson brass where do you get a die with small primer pin . Thanks Perk
     
  8. Ktmracer358

    Ktmracer358

    Joined:
    Jan 15, 2017
    Messages:
    26
    I had a set up with replaceable priming pins and I took mounted one in a drill and turned it down till it fit cleanly through the hole.
     
  9. Perk

    Perk perk Gold $$ Contributor

    Joined:
    Mar 13, 2009
    Messages:
    63
    Thanks Perk
     

Share This Page