WANTED K&M Neck Turner

Discussion in 'Tools, Dies, Rests, Reloading Components & Misc' started by tred1956, Jan 13, 2018.

Trader History (121)
  1. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
    Hi,
    I am in need of a couple of K&M neck turner bodies with carbide cutters. Also need 6.5mm (.264) carbide cutting pilot and 6.5mm(.264) expand mandrel. Three press adapters and one Expand Mandrell window riser. Must be in Excellent Condition.

    Can buy new but I thought someone may have one or two that are not using and I may could SAVE some money also.

    May be interested in others as well. Please PM me with what you have and what you need for it.

    Thanks in advance
    Doug
     
  2. bcarico

    bcarico

    Joined:
    Nov 1, 2011
    Messages:
    121
    Pm sent
     
  3. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
    Sill looking
    Thanks
    Doug
     
    6BRLongRange likes this.
  4. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
  5. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
    Gone Thursday but will be back Friday

    Thanks
    Doug
     
  6. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
  7. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
  8. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
  9. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
    TTT Please
     
  10. dickn52

    dickn52 Gold $$ Contributor

    Joined:
    May 16, 2012
    Messages:
    1,816
    See the add for a K&M for sale about 12-15 below your ask.
     
  11. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478
  12. tred1956

    tred1956 Silver $$ Contributor

    Joined:
    Oct 2, 2008
    Messages:
    478

Share This Page