Folks Using My Ultrasonic Case Cleaning Process...Please Look.

Discussion in 'Reloading Forum (All Calibers)' started by jb1000br, Jan 4, 2007.

  1. kountryboy2

    kountryboy2 Gold $$ Contributor

    Joined:
    Oct 30, 2008
    Messages:
    250
    Take it from someone that has tryed all the voo doo mixes. Go buy hornady case cleaner or the stuff Frankfort arsenal sells. Fill the cleaner up and no glass beakers needed. In 16-24 mins your brass is clean. Inside and out.
     
    dmoran likes this.
  2. onelastshot

    onelastshot

    Joined:
    May 6, 2012
    Messages:
    747
    I think the window of opportunity has passed, this thread is eight years old!
     
  3. Otakar

    Otakar

    Joined:
    Jan 27, 2018
    Messages:
    15
    I use a 1qt cleaner which was bought at McMaster-Carr and was being thrown away by one of my previous employers. I use an "Orange or Citrus" solvent to clean the brass. It performs beautifully. I have not found anything that works better and will not dammage the brass. http://oileater.com/industrial/cleaners-degreasers/orange-cleaner/ If I want the tarnish to be removed from the brass (if there is any) I add about 1/2 teaspoon of a water soluble soldering flux to it. It removes all the tarnish. At one time I used to use a little Ammonia but it damages the brass. I was thinking of buying a larger cleaner such as this one. The price is right but I am not sure about the power. https://www.harborfreight.com/25-liter-ultrasonic-cleaner-63256.html
     
    Last edited: Jan 27, 2018
  4. Oldeadeye

    Oldeadeye

    Joined:
    Jan 28, 2017
    Messages:
    10
    What’s so special about the cleaner?
     
  5. ratbuster

    ratbuster Silver $$ Contributor

    Joined:
    Aug 20, 2015
    Messages:
    463

    You can buy 1 lb of Sodium Bi-Sulfate for $10 delivered on Ebay:

    https://www.ebay.com/itm/Sodium-Bis...724390?hash=item419af690a6:g:zQMAAOSwZQRYgs8B

    According to RSilvers that should make 467 gallons.....Easy Peasy
     

Share This Page