Discussion in 'Gun Project Questions & Gunsmithing' started by mram10, Jan 12, 2018.
Been down with the flu for 3 days. Yesterday was perfect too.
Sorry guys, no update cause I found out I’ve had pneumonia for the last month. Got bad enough to head to the dr for the first time in years, so I can’t go outside for a while. Killing me to sit and look at the 3 rifles ready to test.
Get well. Health trumps anything else!!
Finally got it out today. Light wind but nothing bad. Did the shoot one, clean for the first 5 shots while I was zeroing it. After, fired 3-4 shot groups with fl sized brass with no other prep, pulled 210vlds, h4831sc. All 3 groups were just over 1 Moa at 200 yds. Stock is an hs that isn’t bedded for this setup. Still waiting on the manners eh1 it will be sitting on. Nothing amazing today, but considering it didn’t blow up in my face, I’m happy.
Did a little load testing today with 210 vlds, r22, wlrm and .005 off lands. Pics are in order of 62, 63, 64, 65 and 66 gr.
All 3 shot groups at 200yds. Think I will dabble between 65 and 66 gr next time.
Try this load.
You might try this load.
Hey Butch where are the other four shots? NICE
This is 69grs of R-26 with a 215 Berger with a COAL just under 3.2". Velocity is 2960fps.
947yds. Those are 1" grid lines on the plate.
How about some pics of the fired brass, mram10........
Already resized. Next time
Separate names with a comma.