Burris Signature 30 mm Ring Inserts

Discussion in 'Scopes, Optics, LRFs, Spotters, BoreScopes' started by bsekf, Sep 26, 2019.

  1. bsekf

    bsekf

    Joined:
    Apr 22, 2008
    Messages:
    625
    Burris does not offer ring inserts for the 30mm rings. Has anybody altered a set of "0" inserts to make "10" or "20"'s. You would have to grind one side and shim the other. Just wonder how you did it?

    Bill
     
  2. jds holler

    jds holler Gold $$ Contributor

    Joined:
    May 3, 2015
    Messages:
    1,790
    I'm tryin to figure out how to use the inserts to turn my 1" rings into 30's.:p jd
     
  3. Raythemanroe

    Raythemanroe Bullet Whisperer Silver $$ Contributor

    Joined:
    Oct 28, 2012
    Messages:
    4,152
    I have a Burris Signature 30mm set that came with the set of inserts.

    Ray
     
    painter and Jody Simcox like this.
  4. lb-ft

    lb-ft

    Joined:
    Jul 8, 2015
    Messages:
    103
    Unless something has changed very recently, Burris does offer ring inserts for the 30mm rings. I have several sets and they work marvelously.
     
    jghoghunter likes this.
  5. RetiredArmy

    RetiredArmy Silver $$ Contributor

    Joined:
    Apr 14, 2016
    Messages:
    227
    I just last week received a set of +10/-10 30mm inserts from Burris. Give them a call, great people.
    Thanks Bill
     
    foxguy and Raythemanroe like this.
  6. Danoh

    Danoh Gold $$ Contributor

    Joined:
    Feb 7, 2017
    Messages:
    322
    I believe (could be wrong, would have to check my spare inserts) that Burris only offers 0’s and +/- 10’s for the 30mm Signature Zees.
     
  7. jghoghunter

    jghoghunter Gold $$ Contributor

    Joined:
    Feb 10, 2007
    Messages:
    1,023
    This is correct unless something has changed recently.
     
  8. bsekf

    bsekf

    Joined:
    Apr 22, 2008
    Messages:
    625
    When you buy Burris 30mm rings you get 4 inserts, 2 "0" and a "+10" and "-10".

    I have used the "+/-10"'s, all I have left are "0".

    I wondered if anybody had tried to make thier own inserts, by grinding and adding shims.

    I will contact Burris and see if they will send me the +/- set. I don't see them for sale at Midway and etc.

    Bill
     
  9. MGYSGT

    MGYSGT Silver $$ Contributor

    Joined:
    Oct 27, 2010
    Messages:
    845
    Have you tried putting the minus in the front and the plus in the rear (or the other way if needed). That's 20 MOA.
    That's a lot of MOA.
     
  10. KY-Windage

    KY-Windage

    Joined:
    Jun 28, 2018
    Messages:
    85
    They come with 2 sets of 0's and 2 sets of 10's, so that you can achieve a total of 20 MOA change.

    It isn't exactly "MoA", but it is close.

    More and more I am using the Burris XTR Signatures, which come with a set of 0, 5, 10 and two 20's.
     
    Joe Salt and Lone Hunter like this.
  11. STOMP442

    STOMP442 Gold $$ Contributor

    Joined:
    Jun 10, 2015
    Messages:
    698
    If you bought the signature select zee rings they should have inserts. If you bought the standard zee ring they are just a steel ring no inserts.
     
    Lone Hunter likes this.
  12. hogpatrol

    hogpatrol Don't criticize the farmer with your mouth full. Gold $$ Contributor

    Joined:
    Apr 28, 2009
    Messages:
    6,957
    I have extras. PM me your mailing address.
     
  13. Danoh

    Danoh Gold $$ Contributor

    Joined:
    Feb 7, 2017
    Messages:
    322
    Whatta Guy!
     
  14. bsekf

    bsekf

    Joined:
    Apr 22, 2008
    Messages:
    625
    I have written Burris and am waiting for a reply, so hang on. If I don't get any I'll contact you. I need a couple of sets of the +/- 10's.

    Sent you a PM and thanks!

    Bill
     

Share This Page