Discussion in '6BR, 6BR Improved & Wildcats' started by Lee Black, Jul 23, 2017.
Looking for a 6mm br improved reamer and dies. Looking to shoot 105 to 115
JGS. for a reamer and when you receive the reamer, get a 6mm Wilson die blank and make the seater from the reamer and get a Harrell's 6br imp full length die. and you are set....... Jim
Why not the New Dasher Norm Brass and Reamer from Bullets.com
No Fire forming Brass
Thanks guys makes it easier decision
I believe he is speaking of a 6BRAI and not a 6 Dasher. If I am reading this correctly.
Check out Bullets.com ! He has new Dasher Brass made by Norma. The Neck is .050 longer.
He sells a PT Reamer for the Brass.
I have all the stuff Now.
The 6 BRA is not the Dasher. It is simply a 6BR with a 40 degree shoulder. No fireforming needed. It's supposed to be alot easier to tune and very accurate. Good luck with your Norma Dasher brass, most everybody I know couldn't get the velocity and lost primer pockets. Matt
You want some more?
I have 496 pieces if you don't have enough to suit his needs!
Is the normal brass that bad?
You guys are stealing this guy's thread
it's not as good as normal dasher 6br brass yes
I believe there is only one answer and he got that in the first couple replies. Maybe the other answers will save him from buying the wrong brass. Matt
Lee Black seems to know what he wanted and I bet wasn't going to buy the wrong brass. He was asking about reamer and dies not brass. It's Don that is confused and even after you, Matt explained it he was still confused. Lee hasn't been back since e the 6th reply.
I'm confused, would it be safer go with something with factory Info?
Thanks guys. You are right not interested in bullets.com new dasher brass. Has anybody used the bra in a repeater from ai mags? Do they need mag kits like some of the dashers?
Yes, You will need the mag kit to keep the short case from trying to flip up.
Separate names with a comma.