Anschutz trigger on Remington 700 ?

Discussion in 'Gun Project Questions & Gunsmithing' started by bored184, Mar 15, 2019.

  1. bored184

    bored184 Silver $$ Contributor

    Joined:
    Mar 16, 2011
    Messages:
    42
    I know it can be done but I can't find too many posts stating if it's worth it or not. I recently picked up a Anschutz 5018 trigger, deal was to good to pass up. I am toying with doing a palma build and using a Briley adapter along with the 5018 trigger.

    Any input would be greatly appreciated.
     
  2. Dusty Stevens

    Dusty Stevens COVFEFE- Thread Derail Crew

    Joined:
    May 8, 2014
    Messages:
    10,581
    I dont like having to use an adapter. I like as few pieces as possible. With good 2 stage triggers these days that will drop in i see no need in using the fine 5018 trigger anymore
     
  3. jr600yd

    jr600yd Gold $$ Contributor

    Joined:
    May 22, 2006
    Messages:
    1,075
    Be easier to just get a Jewell
     
  4. Rtheurer

    Rtheurer

    Joined:
    Jan 22, 2006
    Messages:
    2,143
    The adaptor can in some cases lower the trigger far enough to not fit into the trigger guard anymore.
    Running a 5018 on a Stolle Panda machined specially for that set up.
     
  5. Robert

    Robert Silver $$ Contributor

    Joined:
    Feb 16, 2008
    Messages:
    436
    + 1
    R.G.C
     
  6. 6fatrat

    6fatrat SLING SHOOTER Silver $$ Contributor

    Joined:
    Dec 22, 2011
    Messages:
    269
    I have 2 post 68 WIN 70's, I installed 5018's back in the late 80's they work great.
    I agree with the other guys, lots of great triggers for the 700.
    I recommend the Tubb trigger I have 5, all on prone rifles.
    Steve Bair
     
  7. bored184

    bored184 Silver $$ Contributor

    Joined:
    Mar 16, 2011
    Messages:
    42
    Thanks for all the input.
     

Share This Page