These two barrels are made from Green Mountain blanks that I hand lapped a slight amount of taper into the bore after turning down to .920. The bore is slugged many times throughout the process. The chamber is cut with a Manson reamer made to my specs. I do finish out the lead of the chamber. Barrels are cut and crowned at the tightest spot of the blank with 11 degree crown. Barrels are indexed to 12 o’clock. Both barrels are test fired for reliability and accuracy. The are stainless steel finished at 20”. They are .920 diameter. Barrels will have a slip fit into the receiver. $150 shipped.