6mm Dasher Loads

Discussion in '6BR, 6BR Improved & Wildcats' started by AckleyImproved, Jul 3, 2008.

  1. JamesnTN

    JamesnTN Silver $$ Contributor

    Joined:
    Nov 22, 2004
    Messages:
    1,581

    Larry what length barrels are you using?
     
  2. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    27 3/4 to 30 7/8 7.5 twist to 8.1/3
    Mc Gowen , kreiger ,Bartlein ,Broughton Brux They all shoot my preference so far is kreiger and Bartlein . Larry
     
  3. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    29.5 to30 3/4 works with all .
     
  4. JamesnTN

    JamesnTN Silver $$ Contributor

    Joined:
    Nov 22, 2004
    Messages:
    1,581

    Thanks I tried the H4350 in 28" barrels and found it just didn't work as well as my 30" barrels.
     
  5. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    How many GR are you using? I asume your not using a tuner. Larry
     
  6. JamesnTN

    JamesnTN Silver $$ Contributor

    Joined:
    Nov 22, 2004
    Messages:
    1,581
    35.8-36.0 with a 130 FB no Tuner
     
  7. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    I run 36.6 with Hybrids jumped .020 with that you must use a long drop tube and a slow pour. Larry
     
  8. JamesnTN

    JamesnTN Silver $$ Contributor

    Joined:
    Nov 22, 2004
    Messages:
    1,581
    I haven't tried the hybrids in my HG it shines with the 108 BT and I know all about that long drop tube and slow pours, if not you'll have powder up into the necks.
     
    L1986 likes this.
  9. bootlaceb

    bootlaceb

    Joined:
    Aug 22, 2007
    Messages:
    130
    If I used 32.4gr Varget, CCI 400's and a 108 BT. What should I come down to if using a CCI 450 primer?
     
  10. Josh Butler

    Josh Butler

    Joined:
    Feb 4, 2016
    Messages:
    101
    Personally I would not come down any. I'm shooting almost a grain more than that with cci 450's with no pressure. BUT this might not be your case! So you can drop back to 32.0 and work back up but I bet you want have any problems.
     
    bootlaceb likes this.
  11. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    I try every primer. But I try to get the lowest ES possible . Larry
     
  12. Terry Altom

    Terry Altom Silver $$ Contributor

    Joined:
    Feb 6, 2014
    Messages:
    622
    James / Larry,

    Have you tried RL-16 in your Dasher?
     
  13. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    No What is the case fill I like over 103 full . Never have got my Es down without it . Larry
     
  14. Terry Altom

    Terry Altom Silver $$ Contributor

    Joined:
    Feb 6, 2014
    Messages:
    622
  15. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
  16. Terry Altom

    Terry Altom Silver $$ Contributor

    Joined:
    Feb 6, 2014
    Messages:
    622
    I did manage to get 16 lbs off H4831(sc) hoping that he's well in my 260AI
     
  17. JamesnTN

    JamesnTN Silver $$ Contributor

    Joined:
    Nov 22, 2004
    Messages:
    1,581
    I haven't seen any on the shelves
     
  18. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    The last I got was a year ago but that 80 pounds . It was at the last gun show but in one pounds Larry
     
  19. savagedasher

    savagedasher Gold $$ Contributor

    Joined:
    Jul 25, 2012
    Messages:
    6,405
    Pulled 16 up on QL Z1 and Pm looked okay pressure that I shoot it fills the case too full and the 95 percent of bullet speed is only 10"
    Nothing I would want . Larry
     
  20. JamesnTN

    JamesnTN Silver $$ Contributor

    Joined:
    Nov 22, 2004
    Messages:
    1,581

    What powder are we talking about?

    For me I'm talking RL16 that I've not seen any on the shelves.
     

Share This Page