6 dasher build opinons

Discussion in '6BR, 6BR Improved & Wildcats' started by bullseyeshtr, Sep 13, 2018.

  1. bullseyeshtr

    bullseyeshtr

    Joined:
    Nov 22, 2016
    Messages:
    14
    I am looking to build a 6mm Dasher for NRA XTC, mid range and long range.

    Would reamer specs of 0.272 neck and 0.155 free bore be right?

    I am want to run the 110 sierras, I was thinking of going with a Krieger, 30" 5R in 1-7tw is this right?

    What kind of starting loads would I be looking at?

    I am probably going to have DJ hydro form the brass for me.

    Any opinions/comments would be greatly appreciated. I have searched on and just making sure I'm on the right track.

    Thanks
    Garth
     
  2. 10XSHOOTER

    10XSHOOTER

    Joined:
    Mar 20, 2013
    Messages:
    14
    Contact Dan Dowling in Grand Jct, Co. 970-434-0525 His phone hours are 9-11:00 Mountain time. Dan developed the Dasher. He'll know what you want!
     
    Mulligan likes this.
  3. swd

    swd Gold $$ Contributor

    Joined:
    Nov 25, 2008
    Messages:
    1,891
    .262" with .155" will work well with the 110 SMK. Back off .5-.7gr from a 105-107 load.

    Edit .272" not .262" for a no turn. Brain fade on that...
     
    Last edited: Sep 21, 2018 at 12:26 PM
  4. bullseyeshtr

    bullseyeshtr

    Joined:
    Nov 22, 2016
    Messages:
    14
    thanks for your input.
     
  5. L W P

    L W P

    Joined:
    May 29, 2016
    Messages:
    254
    .262" or .272" Type O ?
     
    swd likes this.
  6. swd

    swd Gold $$ Contributor

    Joined:
    Nov 25, 2008
    Messages:
    1,891
    Glad you caught that! .272" no turn.
     
  7. bullseyeshtr

    bullseyeshtr

    Joined:
    Nov 22, 2016
    Messages:
    14
    I caught the typo. I figured you meant 0.272"
     
    swd likes this.

Share This Page