SELLING 300 Ackley Package / 300 Wtby Redding Comp Neck Die

Discussion in 'Tools, Dies, Rests, Reloading Components & Misc' started by PBking51, Nov 16, 2019.

Trader History (31)
  1. PBking51

    PBking51 Silver $$ Contributor

    Joined:
    Jul 22, 2019
    Messages:
    6
    $135 shipped for all!

    NOTE: BULLETS WILL BE PULLED- NO PRIMERS/POWDER INCLUDED


    Redding Competition Neck Die with .330 Bushing (300 weatherby/ but used for AI too)
    44 pieces of Norma Brass 1x fired
    26 pieces of Norma Brass with necks turned .012 sized to .335
    -------70 pieces of brass in total!!--------


    39 Berger 210's (will be pulled from loaded rounds before shipping/ powder & Primers discarded)
    NOTE: BULLETS WILL BE PULLED- NO PRIMERS/POWDER INCLUDED


    Please post here prior to PM'ing
    Paypal F&F Preferred but will accept check/MO (from contributing members only)
    NOTE: BULLETS WILL BE PULLED- NO PRIMERS/POWDER INCLUDED


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. grandslam 4

    grandslam 4 Gold $$ Contributor

    Joined:
    Feb 16, 2007
    Messages:
    51
    Do you have a complete set of 300 ackley die?
     
  3. PBking51

    PBking51 Silver $$ Contributor

    Joined:
    Jul 22, 2019
    Messages:
    6
    If you neck size, a 300 wtby will work. Have used it but because I still have a weatherby I am holding on it. I had previously borrowed a full length die for AI and I found mine shot better with the neck sizing. With that being said, the fireformed brass may need to be resized then formed to your chamber but the ones ready for fireformed should chamber
     
  4. PBking51

    PBking51 Silver $$ Contributor

    Joined:
    Jul 22, 2019
    Messages:
    6
  5. PBking51

    PBking51 Silver $$ Contributor

    Joined:
    Jul 22, 2019
    Messages:
    6
  6. PBking51

    PBking51 Silver $$ Contributor

    Joined:
    Jul 22, 2019
    Messages:
    6

Share This Page