22 seating stem for BR case

Discussion in 'Small Stuff--22s, 20s, and 17s' started by Goldenfinger, Jul 24, 2018.

  1. Goldenfinger

    Goldenfinger

    Joined:
    Jul 11, 2017
    Messages:
    33
    Those of you shooting .22 bullets in a wildcat, what are you doing about the seating stem? I ordered 6mm Dasher Redding F/L sizing dies with a 22vld stem. Apparently Redding decided they would make the diameter of the 223 stem different from the 6Dasher.

    The 6Dasher stem is close, so I may just drill out the stem so it doesn't push on the meplat. Any other suggestions?
     
  2. Yote Hunter

    Yote Hunter

    Joined:
    Feb 28, 2015
    Messages:
    245
    Good question. Been trying to figure that out for my 22 BRDX.
     
  3. Toby Bradshaw

    Toby Bradshaw Gold $$ Contributor

    Joined:
    Oct 31, 2008
    Messages:
    1,314
    Wilson seating die blank and the chambering reamer used on the rifle.
     
  4. RussellJ

    RussellJ Gold $$ Contributor

    Joined:
    Jul 21, 2013
    Messages:
    191
     
    Last edited: Jul 25, 2018
  5. Phil

    Phil

    Joined:
    Feb 16, 2006
    Messages:
    3,472

Share This Page