110 SMK and 1-7.75" twist

Discussion in '6PPC, 6-6.5x47, 6XC, 6 Rem, 243' started by JBT, Sep 4, 2017.

  1. JBT

    JBT Gold $$ Contributor

    Joined:
    Jan 24, 2017
    Messages:
    347
    My 6 Creedmoor will soon be finished getting rebarreled. Barrel is a Mullerworks 4 groove .236" bore 1-7.75" twist. Any of you guys shot the 110's in a 7.75" twist?
     
  2. Mark deluia

    Mark deluia Gold $$ Contributor

    Joined:
    Jan 17, 2016
    Messages:
    30
    Just shot yesterday, 110 smk with a 7.7 28"

    Mark
     
  3. JBT

    JBT Gold $$ Contributor

    Joined:
    Jan 24, 2017
    Messages:
    347
    Thank you Mark
     
  4. JBT

    JBT Gold $$ Contributor

    Joined:
    Jan 24, 2017
    Messages:
    347
    How did those 110's shoot?
     
  5. 1shot

    1shot Site $$ Sponsor

    Joined:
    Feb 19, 2006
    Messages:
    1,239
    Not the twist rate you are asking about, but my 7.5 twist is plenty at 1,100 ft. ASL. Higher altitudes require a little less twist.
    I hope this helps,

    Lloyd
     
  6. Mark deluia

    Mark deluia Gold $$ Contributor

    Joined:
    Jan 17, 2016
    Messages:
    30
    Ok. Will test them again today in 74 degree weather will let u know later today
    Mark
     
  7. RDavies

    RDavies Silver $$ Contributor

    Joined:
    Jun 29, 2006
    Messages:
    754
    How did the 110s go in the 7.7" twist at longer ranges? What temp and altitude have you tried them in?
     
  8. JBT

    JBT Gold $$ Contributor

    Joined:
    Jan 24, 2017
    Messages:
    347
    I'd like to know how it did also. My 7.75" twist 6 Creed will be ready in a couple of weeks. Although I will primarily shoot 105 Hybrids because I have an abundance of them, I will test the 110's.
     
  9. basshusker

    basshusker Back in Sioux Falls Site $$ Sponsor

    Joined:
    Nov 24, 2009
    Messages:
    156
    At 1500 ASL I can spin em in a 1:8 Brux. 6x47L 26"
     
    boltfluter likes this.
  10. 1shot

    1shot Site $$ Sponsor

    Joined:
    Feb 19, 2006
    Messages:
    1,239
    Update:
    Shot a registered 600 yd. match yesterday, any/any/irons with sling and coat.
    Went 199-9x 200-12x, 199-9x 598-30x.
    The bullet will defiantly shoot!
    These were unsorted, out of the box and load.

    Lloyd
     
    boltfluter, swd, 390fe and 1 other person like this.
  11. JBT

    JBT Gold $$ Contributor

    Joined:
    Jan 24, 2017
    Messages:
    347
    Nice!
     
    perry42 likes this.
  12. Mark deluia

    Mark deluia Gold $$ Contributor

    Joined:
    Jan 17, 2016
    Messages:
    30
    I could not get 110 smk to shot after all . I tried everything had to go with 105 hy. I have a 7.7 28" Best a got was 2" @ 300 yards not good enough for me. 105. Hy. Was good. 410 yards. .611 group

    Mark
     
  13. JBT

    JBT Gold $$ Contributor

    Joined:
    Jan 24, 2017
    Messages:
    347
    Thanks for the update.
     
  14. Willow

    Willow

    Joined:
    Feb 9, 2016
    Messages:
    206
    Jammed or jumped?
     
  15. Mark deluia

    Mark deluia Gold $$ Contributor

    Joined:
    Jan 17, 2016
    Messages:
    30
    I'm right on top of lands Very , very sight marks on bullet

    Mark
     
  16. 1lnbrdg

    1lnbrdg

    Joined:
    Jun 17, 2014
    Messages:
    283
    1/7 twist, I couldn't get them to shoot at all until I jammed them ~.010". Even then, it wasn't very impressive.
     
  17. 1shot

    1shot Site $$ Sponsor

    Joined:
    Feb 19, 2006
    Messages:
    1,239
    Jumped .015, although they seem to have a wide tune window.

    Lloyd
     
  18. Gabe22BR

    Gabe22BR Gold $$ Contributor

    Joined:
    Dec 13, 2014
    Messages:
    653
    I jump mine .018 and good luck.
     
  19. steve_podleski

    steve_podleski

    Joined:
    Feb 15, 2006
    Messages:
    552
    Shot the 110MK out of a 1 in 8 modified 243 and they shoot great.
     
  20. jbhotrod

    jbhotrod

    Joined:
    Dec 12, 2013
    Messages:
    107
    Care to post pics of rifle?
     

Share This Page