Search results

  1. Release agent for JB weld bedding

    I've used one very liberal coat and did not buff. When putting it on, I did so under good lighting so I could make sure everything was coated as it should be and there were no lumps of the wad showing on the action.
  2. Savage 110 HEAVY trigger and bolt lift

    I've never had any luck with bolt lift kits. I added a long bolt handle and that solve the bolt lift issue. I also dumped the Savage trigger assembly and went with a JARD trigger. Both of these changes made a big difference in the Savage.
  3. Release agent for JB weld bedding

    Neutral shoe polish and Imperial case lube also work well. Some also use the Hornady Hot Shot case lube.
  4. Snap on ratchet

    In the 60' while in high school, I worked on cars a lot. I didn't have my own tools back then and used my dads tools. He had the same style ratchet in 1/2" drive. Everything he had was 1/2" drive. No idea what brand the ratchet was, but it was very easy to switch it out to reverse the drive.
  5. PTG 700 action

    Several years ago, I bought a Rem. 700 action, left hand bolt. It came with a .308 bolt face. I was making a 20 VT and needed the smaller bolt face. I bought a complete bolt from PTG and after about a 2 month wait, it finally came in. I had the action trued up with both bolts. I haven't...
  6. Portable Shooting Bench/Table

    Link does not work
  7. Burglar Alarms for Shooting Club

    I agree with what dellet mentioned above. Only thing a light coming on at night would do is aid the crook in getting inside. You could hide an Apple AirTag to items that would be taken. With a hidden motion detector inside the business, it could alert you instantly with movement inside the...
  8. 10 22

    Thanks for that post. I want to do this with my Charger after my new barrel goes on.
  9. The took the hay off today - it's officially Woodchuck season!!!

    I'm right there with you Rick. I no longer shoot prone for that very reason and after knee replacement it's hard to get up. A tripod is your best friend. Standing or sitting it's great.
  10. Ruger American Predator Gen 2

    I use brakes on all my specialty pistols. It allows me to see my hits/misses when hunting prairie dogs. When I'm at the range they stay on. There's a point of impact change if they're removed. If you're hunting with it and don't have a spotter or not interested in seeing hits and misses...
  11. Portable Shooting Bench/Table

    I used a rotating shooting bench for several years. For me it didn't work out very well. I found it wasn't that easy to relocate when needed. I switched over to a game cart & tripod. I move around frequently depending on wind direction and what the prairie dogs are doing. When moving from...
  12. Ohio Groundhog 2025 Starts!

    How's that Zulus scope working out for you? I'm on the edge of getting one.
  13. Savage Shooters

    I have 2 Savage rifles, 6 BR and 20 Practical, both with JARD triggers. I haven't had any issues with either one.
  14. Still debating, 223 vs 22ARC

    .223 or .223 AI
  15. V-Max, Are you jammin? Or jumping?

    Not an AR shooter, but the system I use will work with the AR's as well. When checking out a new load, my arbor press and Wilson dies are always with me. I start by knowing where the bullet touches the lands. All my test ammo starts there along with a known powder charge that I think will...
  16. Rimfire Benchrest Pistol

    You're not the first person that has had issue with this company after the son took over. I decided to stay away from them.
  17. shipmygun.com

    I've used there service 5 times and no issues at all. For me, this has been the best route to go with.
  18. Desh savage bolt lift kit

    Snake Oil Salesman: A snake oil salesman is a person who sells a worthless product or remedy to people for money. I found the desh a gimmick and not worth the money at all. Back in the 60's at car shows there was a company selling a gimmick that plugged into the top of your distributer cap...
  19. Need a Tool for Savage Bolt

    As JB 10 stated, a cresent wrench is all you need. An open end wrench will also work. Very simple and easy to do. I keep one in my tool drawer in the reloading room. It doesn't have to be a tight fit at all. Adjust it to fit and slightly back off. Easy Peasy
  20. Calling all 20 cals...Let's see your wildcats!

    20 Practical. It's so easy to load for. Pictured below is a 15"m 10 twist X-Caliber barrel mounted to a Savage 110 PCS. I also have a 20 VT, but the 20 P has become my favorite. Last time at the range it was averaging 3650 FPS.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,556
Messages
2,198,202
Members
78,961
Latest member
Nicklm
Back
Top