Search results

  1. 338 Lapua improved data

    I would. I took mine out for the first time in 4 months with ammo loaded from last trip. 600 yards cold bore 3 shot group

  2. 7-300PRC?

    3k with a 24" won't be an issue with 180-190 GR bullets. My 24" was 3080 with H1000 and wasn't a hot load.

  3. 7-300PRC?

    I would do a 28 Nosler or 7 Rum if your wanting that speed.

  4. Lapua 300 WSM brass

    Can others that have Lapua brass confirm the .200 line measurement please?

  5. 300 Norma Improved 35 degree

    A good friend is running 89.8 of N568 with 230's in a 26" barrel. 2990 FPS.

  6. 338 Lapua improved data

    Incase anyone is wanting to try a longer jump that will run in a CFE-9 BDL. These are 3 shot groups at 100 yards with 102.5 N570. 3.970 COAL. It’s the bottom row.

  7. 338 Lapua improved data

    These 338 Lapua Improved rifles do shoot great. I tried the 300 SMK for a few hundred rounds and just wasn’t getting the accuracy I was after. I finally switched to the 300 OTM and they shot much better. I have a 26” barrel and it’s a little slower than some. But 2850 is plenty for me...

  8. 7 SAUM Load Data RL23&26

    I shoot 59.8 with 180’s in a long action. 60.8 was clickers. 26” barrel the 59.8 is a great per load for .235 FB. If your 2.950 I would suspect you would be: 58.5 RL23 60.5 RL26

  9. 300 Norma Improved 35 degree

    .010 is quite a bit. I would be jamming them good. And keep an eye on them for case head separation.

  10. SOLD Broughton .30 cal barrel

    I’ll take it.

  11. WTB Hawk Hill Blanks

    Looking for Hawk Hill blanks .264 1-7.5 .285 1-8 or 1-8.5 .308 1-9 to 1-10 338 1-9 to 1-10

  12. Benchrest Popularity and Growth

    I have shot a few matches with the deep creek crowd. Great guys and everyone was very helpful. Alex kept winking at me but that’s a different story. I did learn a ton about tuning and shooting. I have also shot prs/NRL Hunter matches. What attracts more shooters to PRS is the practical...

  13. 7 PRC Load Development

    Sounds about right. I think the volume between the 2 is very close.

  14. 7 PRC Load Development

    ADG

  15. Broughton Barrel Contour Chart

    5.5 is between a Bart 3B and a Remington Sendero. Should also be 1.250 shank. 3” long with .730 on the muzzle.

  16. 7 PRC Load Development

    In my 7 prc with a 26” barrel, 68.7 grains H1000 with 180 vlds shoots 1/4” at 2960. Fed 210 or cci 250 shoot the same from testing.

  17. 300 Norma Improved 35 degree

    I used 80 grains H1000. So your a couple grains higher than I was.

  18. 300 Norma Improved 35 degree

    I was using 90 grains in a standard Norma with 230’s. So you’ll be in the 92 arena.

  19. 338-300 Norma Improved 35 degree

    I am going off memory here. But 91-92 grains. They were .010 off. But .050 off shoots good as well. The BC wasn’t accurate for me so check that out. I didn’t end up killing anything with them.

  20. 7mm PRC?

    SAAMI is .318 so should be fine.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,558
Messages
2,198,219
Members
78,961
Latest member
Nicklm

Share This Page

Back
Top