Search results

  1. bullet flight path charts

    i am looking for bullet flight path charts with dimensions. i have plenty of drop charts/info but i want to see the path of the bullet to1000 yards and how far above bore it is every 100 yards. a solver where i can input the parameters would be great. anybody help me with this?? thanks

  2. Where to get adapter to fasten my iphone 15 to a Kowa TSN-82SV Spotter

    I wonder where I should get an adapter to fasten Iphone 15 to Kowa TSN-82sv Spotter ? Are there different makes and models? Is it a generic thing or do i need a special one for my application? Which one is best? Thanks— Hozz

  3. 16” 22-250 Loads?--- UPDATE/5/19

    i have a Rem factory varmint 22-250 barrel (12 T) that needs to be cut down to 16” or so at longest to be useable. it looks like a bullet blew up in the bore just past that. if i give this a try i wonder what powders and loads to try? i have done a search and found some info. i thought...

  4. 21 Sharp

    i dont see much info around here on the 21sharp ?? Forum Boss: Here is a search result: https://forum.accurateshooter.com/search/1364297/?q=21+Sharp&o=relevance Here are some of the results:

  5. Why are these Flat Spots on my Shoulders

    Loading up some Pete 6BR brass today I got flat spots on the shoulders. these are different than lube dents I have had. they are kind of a facet. i thought i figured it out by varying the amount of lube-imperial- but that turned out not to work. thing is when i size lapua with this same...

  6. hornady FTX bullets in a Marlin 336?

    i was thinking of getting some hornady 130 gr(ithink);FTX bullets to use in my marin 336 in 30-30– seems i heard or read that cases have to be shortened for these bullets to function through the magazine tube. is this correct? or will they work with the brass as is? Thanks

  7. SELLING spf Peterson 284 Win. new brass

    for sale —SPF 400 Lapua New 6mm BR Brass- sealed boxes—- $425.00 shipped SPF 100 Peterson New 284 Win Brass. one open box — one sealed——— 150.00. shipped Cash- MO or Check —-send me a PM if youre interested—— thanks for looking

  8. Chilean Mauser 95 cock on close help

    i have a Chilean M95 mauser in 7x57— it is a cock on close model. the cocking piece/pin fall is an honest 1” this takes a strong shove to close the bolt. It seems like this gun would shoot reliably with much less pin fall. is this true? would putting in a longer firing pin to reduce fall...

  9. good place to buy new NF benchrest scopes?

    i have bought all my new NF scopes from EuroOptic. they have been ok. I just thought i might spread a little business around to someone else. Anybody recommend an NF dealer?

  10. US Made 6BR brass at Graf?

    I see Graf is advertising US made 6br brass for 89.00/100– anybody know who makes this? seems like it would be alpha,agd or peterson but it is considerably cheaper than those brands on the graf site.

  11. Vertex— Bench Source Annealer contact info?

    the contact info on my bench source annealer manual doesnt seem to work and i did a search for the webpage but couldnt find anything. any body got contact info for them? thanks

  12. How far would you hand ream when finishing a Chamber?

    l have two short chambered Rem 700 stainless barreled actions. both belted magnums-A 7mm RM and a 300 Win Magnum. they are short chambered about .020— Should i hand ream them to finish them off or set them up in the lathe and do it? i have hand reamed a chamber before but less than .005—I...

  13. SOLD Devcon

    >>3 of these SPF>>Received a little more devcon than i need so Im selling some. This is fresh- just got it today. Devcon 10110 1# kit. I have 4 available. 69.00 each shipped PM me if you want some—- Thanks

  14. Christmas Wish List

    Dear Santa— Im sending you my list a little early to give you time to get this stuff around!! :oops: Thanx and Merry Christmas Ho Ho Ho 1.———- 12 NightForce Comp Scopes. 15x55 2.——- 6 Bat B 3.——- 6 Borden Rimrock 4.———-coupon for 12 Kreiger Barrels 5.———-coupon for...

  15. Rifle Recoil Lugs?

    My question is for a recoil lug on a Rem 700 does a .250 aftermarket recoil lug (what i usually use) have much advantage over the factory lug. The factory lug in question is flat and parallel and rite at .189 thick. I would have to take material off the barrel shoulder to fit the .250 lug as...

  16. Trigger Hanger on Rem 700 ?

    I know its not hard to put the pins through especially since i rarely use a remington bolt stop but Im wondering if anyone has used trigger hangers on R700s? Does somebody make one I could install? Thanks

  17. Edit 1::::::Installing Front Sight base on Marlin 336-1895 ect

    Front sight base broke off my RemMar 336 - only one screw in it and no solder. I probably will have to get a new sight base somewhere and would like to fasten it on so it stays put. I see marlin and ruger have/had 2 screws in the Sight base and marble recommends solder with their base with...

  18. Sight Pusher Tools or methods??

    I learned my lesson the other day by breaking the screw holding the front site ramp on a marlin/rem 336. of coarse i did this tapping the dovetail sight in. ill try not to do that again. What is the best sight pusher for dovetail sights on ramps for rifles and pistols? i know i can make...

  19. Using kiwi neutral shoe polish for bedding release agent? Edit—- black kiwii worked good - that tin will last me quite awhile

    I have used kiwi neutral with good success as a release agent but i am wondering if any color kiwi shoe polish would work also? — its getting hard to find the neutral around here. thanks Edit 10/16/24—— i have used some black kiwi- will see how that works in the morning

  20. 155.5 FullBore bullets in an iron sighted garand at 1K?

    I am going to be trying to hit the plates at 1K from bench with an iron sighted 30/06 Garand soon. I was going to use 175 SMKs or one of the various 175 Berger Target Bullets. Im thinking though the 155.5 berger fullbore might work better. more velocity which oughta help.. If world palma...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,478
Messages
2,196,515
Members
78,936
Latest member
Mitch.Holmes

Share This Page

Back
Top