Search results

  1. SELLING 700, Krieger, chassis, threaded

    Only selling because I have to pay for a lathe and mill. Smooth RR prefix trued 700 action with a Krieger 8 twist barrel chambered in 6.5x47L. Threaded 5/8 24, length 23.5". Trybe chassis (solid, length-adjustable chassis), tuned Rem trigger - very crisp. Very accurate with Nosler 140s, load...

  2. 6PPC brass, starting from scratch. Any new choices?

    I haven't acquired a 6ppc in 15 years so I'm way out of the loop about any new brass options. I have an Al Weber 6ppc in jail that I'll pick up in a week. For a non-competition range target rifle, is there an 'easy button' these days? Is it still Lapua 220R & fire-forming, or is there...

  3. Dumb question about neck clearance & expansion upon ignition

    Probably a dumb question, but I'm trying to understand what happens to the neck diameter upon firing and why you need neck clearance. Upon ignition, the pressure inside the case expands the brass to form to the chamber, but the neck which contains the bullet doesn't see that pressure because...

  4. SELLING WTS/WTT Vortex Golden Eagle 15-60x52 cheap!

    Great glass! Vortex Golden Eagle with fine crosshair reticle. Looks new in box I don't think its ever been mounted, bought it at the last gun show, I've only looked through it in my kitchen. Comes with box and accessories. $1159.99 shipped!

  5. Barrel removal Browning BBR

    I have an old 22-250 that I'd like to get the barrel theaded. I have a barrel vice but my only action wrench fits a Remington 700, I assume that won't work. Can anyone point me to what i need? Thanks.

  6. SELLING Browning SA-22 semi-auto 22LR

    Family member asked me to sell this and I know nothing about them. GunBroker values are all over the place. This is in great shape with nice wood and Engraving on both sides and the trigger guard. I put it on gunbroker with a penny start, someone might get a good deal...

  7. Does anyone make 300BO prefits for a Rem 700 pattern?

    I've purchased a few suppressors and I have powder and heavy 30cal bullets for 300BO and I want to "make" a 300BO bolt action rifle. I have a smooth Rem 700 action with a 223 boltface that I don't use much. Does anyone make a prefit Rem 700 pattern barrels that I could just spin on? Even a...

  8. 1967 Remington 700 ADL 270 Winchester

    Remington 700 ADL 269XXX serial number chambered in 270 Winchester from Remington's golden era. Pretty nice figure in the stock for a factory piece of wood. Tombstone safety. Barrel code shows March 1967 production. It might have been fired a few times AT MOST and its in excellent condition...

  9. Help with hunting rifle bottom metal

    I haven't put a custom hunting rifle together in a while and I'm not up to speed on what to get (or if my parts will even work together). I have slowly assembled parts here and there. I have had a used Kelbly Atlas Tactical short action mag bolt face sitting on the shelf for a while. I bought...

  10. WANTED disregard

    thx

  11. SELLING WTS Nosler brand 28 Nosler brass

    I was going to build a 28 Nosler, but plans change and I've got no plans to use these in the near future. I got these at the gun show around 2 years ago. They came in cardboard boxes, I think they're factory loaded brass that had the bullets pulled. I didn't check them all, so there might be...

  12. K98 question — Controlled feed from Mag

    I'm no CRF expert. Recently bought a K98 for cheap at the fun show. If I place a round into the chamber, I can't close the bolt. But, if I place a round into the internal mag, it will chamber normally. Is this normal? Sorry, I've never had a CRF rifle that acted this way. Thanks in advance.

  13. WTS/WTT Jewell rings with the live centers, 1", silver.

    You guys know what these are. I went to a 30mm scope and these are not being used. $111 shipped.

  14. SELLING WTS/WTT Butter knife handle BRNO 8x57S Full-stock

    Zbrojovka Brno, 8x57s, 7-9 on barrel, 48 in front of action, SN 209XX. This is a shooter-grade example, as it was stored with a slip-on recoil pad and the stock is slightly lighter where the pad was. The pad will be included and is in good shape. The stock may be touched up to be made matching...

  15. 8mm Mauser vs 8x57JS ???

    Finally found a K98 Mauser at the fun show. Grabbed a set of dies and a guy had a bag of brass labeled "8mm Mauser." Got home and found that half are RP 8mm MAUS and half are Norma 8x57JS. I'm no expert, but I had thought that those were both names for the same cartridge, maybe the JS having...

  16. WANTED WTB 300 SAVAGE DIES

    Let me know if you have a set. Thx.

  17. WANTED WTB/WTTF Pre-fit barrel for Origin / Solus

    I couldn't resist the sale price on a SA Solus action. They take Origin prefit barrels, anyone have one they're not using? 308 bolt face cartridges, maybe something in a 22/24/26 caliber; wildcats with brass/dies are fine. Thanks in advance.

  18. A big one

    Couldn't find a legal bull elk, but ran across this. My Grandpa says the area was logged in 1940. See the springboard notches? Anyone know if chainsaws were prevalent in WA state in 1940?

  19. 8700 load for 338 Lapua

    I'm sitting on a bunch of 8700 for my fifty. Lots of 338 lapua threads say use data for 8700 or H870, but no one actually lists the data. Does anyone have any load books, or personal loads for 338 Lapua with 300gr bullets with AA8700 or WC872? Or is anyone's google-fu better than mine? Thanks!

  20. Cheap primers!

    CCI 450s 1000 for 67.99, and code SMS10 "MIGHT" take off another 10%. Other primers for sale too, check out their SALE page. While you're there, grab the Magtech 9mm for 10.99 and Aguila 22lr for 2.09. https://www.ammoplanet.com/products/cci-450-small-rifle-magnum-primers-1-000-count...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,603
Messages
2,221,869
Members
79,751
Latest member
jdoll1742

Share This Page

Back
Top