I had a lock and load now I have Redding T7. Should have bought the T7 in the first place.
Because it contains good old lead
Low spot on the brass would mean a high spot in the chamber. Time for a bore scope.
Those prices bring a tear to your eye
Marine plywood 100% glue with screws every 6 inches on the complete top. The screws are from the bottom so they don't show. Benches are under a...
Would Galileo agree with that
I think you are correct on how they started. The military could send them out this way and all the armor needed was a reamer and a go gauge. You...
It seems to me a short chamber is the safest in this day and age. If a idiot screws on a short chamber the case won't fit no harm no follow. If...
I have built benches with two pieces of 3/4" glued and screwed together and they work well. Three pieces together would be even better.
I wonder how many powder kernels are broken.
I think the "next day spring back" is less with annealed brass.
What ever you decide on get something bigger. It's like a house the minute you buy it's to small.
You may have a chamber that was cut with a reamer on the high side of spec or you may have a chamber that was cut oversize in the rear. The only...
That's a visual we don't need
I use PTG bushings on Manson and JGS reamers
I make mine out of stainless my reason good or bad is steel has a smaller expansion contraction rate when compared to aluminum. I don't put...
What do you guys use for pillar material?
Great site where else can you get flamed for a few bucks a year
Con: It's going to cost you a lot more if you screw up chambering, LOL
And we are bored
Separate names with a comma.