Barrel pulled at 800. I don’t have a bore scope, but at the last match it was shooting low at distance. Weekend after the match, it...
Rings so true. I just pulled my 22 Creed barrel with 800 rounds and am not planning to build another.
I ran a short 6.5 and managed to spin jackets at high speeds...
If u decide to sell the 75’s, I’ll gladly take them...
[ATTACH] [ATTACH] Bushenell HDMR II with original box. About a year old.
ARC M10 low rings
Scope with rings $850
Scope alone $780
Taken the 85.5 to 3200+ out of a 23” 6.5 twist no issues. Currently using the 95’s at 3085 (wiiide node) with no issues. Barrel has about 600...
If u don’t find what your looking for, I have a load for 22 Creed w/85.5 that may get u pretty close.
Haven’t done anything more than a 3 shot with this load. After that group, I took it to 1070yds to confirm dope and went home!
Prior loads were...
[ATTACH] [ATTACH] 560 rounds and finally settled in on a good consistent load.! I learned a lot during the process, and likely spent 50% of the...
[ATTACH] As of 10 minutes ago.
Biggest change was going to BR4 primers. First 3 out of a barrel with 400 rounds and cleaned one time.
Depends on your definition of “really good shooting”.
My current match rifle is a 22 Creed. It shoots 3/8”@ 100 consistently with the heavies...
That sounds more like it. I’ve had great results with the slower powders, including 7977 which had single digit SD/ES numbers but a touch slower.
RL26 in my 23” barrel will push the 95’s over 3200 without issues.
I stopped the 85.5’s at 3200 because that was the goal speed, although I’m...
The 80 and the 85.5 reacted much differently for me.
Tested this combo using RL26.
41.0 = 3150
42.0 = 3200
23” 1:6.5 Bart
No pressure signs
Chased my tail for a couple weeks. Realized I wasn’t setting the shoulders back enough originally when I sized down my 6mm brass that had...
Another 77g.. almost identical recipe.. why not ...
No, these were fresh from the jug.
Separate names with a comma.