Stock SOLD to jcm24m
I'll check with DeOrio in the morning.
Looks like jcm24m will get this stock.
I just checked my V2 and the hole spacing is the same. The diameter of the action is the same. You might check with DeOrio Mfg.
This is the worst imperfection mentioned in the above thread. It looks worse here than it actually is.
I built this stock as a prototype to see if everything would work before building a lacewood stock shown elsewhere in this forum. The wood is...
No vertical carbon fiber layers unless you consider the barrel channel and nose of the stock. Weighs in at 2-1/4 lbs.[ATTACH]
This one is a...
West system epoxy with milled fiberglass to thicken it. I have been using this for awhile now and get good results, also I am used to using it...
Here are a couple of pictures of the bedding job.
I just finished this stock for my upcoming benchrest build. It is Lacewood from tropical South America and the butt is Thuya Burl from Morocco. It...
This is what I use, works well for me.
Is this still available.
What's wrong with the old style lube pads, I still use them. Very occasionally I use Imperial Wax, I suppose that could be applied to a pad also...
Below is the 6mm Grendel I built using a sized case from my 6mm AR built by Whitley. I get my best groups shooting 90 gr. Bergers, the groups open...
I shoot a 6 mm Ar cartridge in a bench rest rig with very good results. It is a 24" heavy varmint 1-8 twist barrel. I am using Berger 90 gr BT...
Why fool around with little tool boxes when something like this will get the job done.
Read what Bill Calfee has to say about slugging .22 rimfire barrels, I think you may think differently about any barrel.
Is this scope still available?
I went with a K & M neck turner and built a lathe out of a power screwdriver. I have turned necks on .14/221, .17 Mk IV, .20VT, .221 Fireball, and...
Separate names with a comma.