The oustside of the barrel would be shaped like a propeller and a banana mixed together, lol.
Some manufactures are a lot closer than others....
It’s all fun and games until ATF shows up, lol
107 Sierra's love to be in the lands. Push them in until the engraving marks are square and work back from there.
I use a tool similar to Stans and spin the lathe up as fast as goes. 45 deg cut .001" at a time inside to out to about .005" past the groove diameter.
Our coops are small 12' max and 22 bird shot stomps them at that distance. Super Colibri's also work great.
Wishing Shooter 13 and you both speedy recoveries!!
I had a triple bypass just under a year ago.
Personally I never understood the fascination with wolves. They seem to be more trouble than they’re worth.
Our indoor range closed after the owners wife kept taking all the cash out of the register and going to Reno and gambling it all away. And I had...
There is no one color that does it all. Clear, yellow and smoke depending on light conditions.
What Tim said ^^^ Bolt click is almost always the case head area isn't sized enough. In other words you need a small base type die.
The last reply before today is 2 years old...
I don't have any second run to compare it to but yes you could easily measure it with calipers.
I've built 4 or 5 Dashers and BRX's on them. It was addressed in your last thread about them.
Yes they're 18 TPI but have a essentially a flat breach w small cone to fit the outside of the lugs on the bolt. Why the just didn't spec out a...
No, they're not the same thread pitch or breach shape.
The only issue we've had with them is a large firing pin with very sloppy fit. As much as .005"-.006". Lots of blanking primers with Dasher's and...
Our local fire department will take old ammo.
My first cuts go .020", .010", .005". There just isn't that much material on the first cut even at .020".
Thanks! I have one just like that, now I know what it is.
Separate names with a comma.