Well with an ajustable gas.block you can just cut the gas off if you like. I have tried this with precision ar's. My issue was cycling. With a...
Weaver T-36
Well i have a harvey deprimer. I like to decap at the range. I clean my brass with a rag dampened with ballistol and decap while others are...
Well the only shot that usually counts with a hunting rifle is that first cold bore.shot. many rifles take 4 or 5 shots to settle down after...
For me first one is precision. With my target rifles i don't want to shoot out my aiming point. I know any time i want i can dial into the...
Well i want that brass to grow until fired but not resized cases chamber a little.snug. at that point you know they are fully fireformed and ready...
Even John whidden says a standard full length die sizes more concentric than a bushing die. What i do is use the whidden full length sizing die...
Supreme Court refuses to block lawsuit against gun manufacturer brought by Sandy Hook families Now this could become serious gun control
I would use a wooden dowel just smaller than the bore
Helps to learn where your problems are in your reloading tools/procedures and what corrects them. Once you get that all dialed in you probably...
Duplex with CDS dial
Since this is a wildcat any dies you plan to buy should be compared to your reamer print. Contact redding. I know they make them for Robert...
Chamber one of your resized cases. If it.chambers easily its not time to set up a shoulder bump.
Neck turning your brass and a custom sizing die set up right will make a.difference. I use wilson dies with an arbor press because i like it. Get...
Robert Whitley Typical group from my 6mm AR Turbo 40. Get the bag rider and set up just.like a bench gun. I use a shadetree front rest and dr...
I see no reason to wet tumble brass. Most of my brass i just wipe off the exterior with a cloth dampened with ballistol. If it hit the ground for...
Dies are the trick. Robert Whitley sells.his uppers with dies and a system for. Fireforming that is easy and works well. If you want to...
Well i owned a 6mm ar turbo40 built by Robert Whitley. No doubt the most accurate ar i ever owned. Pushing 105 bergers 2850 to 2900 fps. [IMG]
Get the extra pins they are easy to bend https://www.midwayusa.com/product/1012974329...
Well first thing is you have to have a rifle/shooter that.can see the difference. Second are.you looking for.another 0.10 reduction in group size?...
Separate names with a comma.
