If the gun is proper, you need to look at the loads, brass, and every aspect of them.
I couldn't get the convertible rings to hold on a PPC in 3/8 dovetails. Sent them back for regular rings, they are by far better than Kelbly's.
The 3M seems the best I've found. When the humidity is high, as in first thing in the morning, is when I feel the stickiness with the gun in the...
Good job Butch, you raise them right!
Cast bullet barrels usually get a special throating, so that doesn't happen.
Cast bullets up to 185 or a bit more are shot in a 14 twist.
Cutting the whole thing, I agree 100%.
All is good Al. Retired and loving it.
How so Al? To me, a fired case has been formed in the chamber which makes it very straight, as apposed to an unfired case that many times shows...
The popular 30BR is a prime example of the difficulty removing the donut inside. Taking the 6MM neck up to 30 cal moves a lot of the shoulder into...
Maybe if won't shoot well.
Tommy, I sent a Weaver 36 BR scope in for repair, it goes to Bushnell. You have to contact Bushnell to get a return number. My scope was rendered...
Lapping usually will eliminate scope rings if lapped enough. You have to watch that the rings still have a gap to tighten. Bedding will fix both...
When you get to measuring +- .001" in shoulder bump, the amount of lube on each case can cause the difference.
Never take equipment lists at full value.
I don't own one so tell me, how are the salvage barrels marked when you have no idea where it will index using the nut?
Same here, and I've pushed the loads quite hard before, no problems.
None better than Butch. He has helped me many times, and I've never met the man.
Sorry, I corrected my post. I meant to say the bore was smaller and the solid pilot would not fit. Not wanting to remove the barrel form my setup,...
I have had a barrel which the bore was smaller than the solid pilot.
I jumped on it too!
Separate names with a comma.