In my experience it was fairly stable. The first lot seemed a little dirty but not hard carbon more of a sooty black. The next lot ran pretty...
It is subjective and for me it's any cartridge that kills from both ends.
I agree and would encourage it, but would call it assembling rather than building and also call Dusty the "Torch" rather than Dusty.:eek:
I've helped quite a few out of trees and off stone walls:) I've found one of the quickest ways down is a 6-284.
I think I know where you are coming from, it took me almost 26 years but I gave it up also.
If it's not machined into the action it gets a Badger Ordnance.
Should be stainless HS uses 416R and cut rifles. Also depends on the action, years ago some were built on 700' s which would be worth less.
I had enough change in 2008
Opportunity squandered, I've been told I'm extremely good at not getting annoyed and proceeding to stroke the egos of annoying uninvited guest,...
I do too the only problem with the law is they fail to enforce it.
The million dollar question, ultimately your rifle will tell you what it likes best. My 47L shot Hybrids so well I didn't look any further.
I wouldn't always trust the reticle to be straight either the scope tracks off the erector not the reticle.
Badger Ordnance Med / High ("2.013), 30mm steel rings. Used lightly never lapped $110. Will clear with 50 objective and MTU barrel.
They wont know the difference between the 70 NBT or the 95 TMK on those little targets accuracy kills.
In a 6-284 70 NBT's 10 thou off the lands...
In My 338 Norma R-33 was very primer sensitive where as H-1000 lit off about equal with each of the primers I tried.
Doesn't sound like a bad habit at all. I often look at the xxx Walnut live edge kitchen table I built for my wife and think of how many stocks it...
Garfields cousin was reported missing.
Build that dasher and don't look back. I use a straight 6br with 105 class bullet to kill deer on permit and often have to push it out to 500. It...
Depends what brand it is:eek:
Separate names with a comma.