Ledd Slinger's Recent Activity

  1. Ledd Slinger replied to the thread scope does not track.

    This is the classifieds section for buying and selling so not sure how much help you'll get. Can't fix a broke scope for you anyhow. At...

    Sep 22, 2017 at 9:47 AM
  2. Ledd Slinger liked rardoin's post in the thread 6.5 Creed velocities with 140/142's?.

    If you are going to cite one experiment and proceed to assume the results are fact....that is the flaw!. One experiment when the vast...

    Sep 18, 2017 at 9:57 AM
  3. Ledd Slinger replied to the thread Bolt face-Devcon then sand down?.

    I've have a couple rifles with the same issue. Got powder burn on the bolt face when finding max pressures with powders. The marks are...

    Sep 18, 2017 at 9:28 AM
  4. Ledd Slinger liked Rob01's post in the thread 6.5 Creed velocities with 140/142's?.

    No it's not as H4350 gives more velocity from 28" barrel compared to a 24" barrel. As I mentioned earlier I shot the same factory ammo...

    Sep 18, 2017 at 9:21 AM
  5. Ledd Slinger liked jdh47's post in the thread 6.5 Creed velocities with 140/142's?.

    I would have to go with experience on this. Rob01 has been using the cartridge for a long time and does compete with it. Different...

    Sep 18, 2017 at 9:21 AM
  6. Ledd Slinger replied to the thread 6.5 Creed velocities with 140/142's?.

    Shhhhh, don't let brians356 hear this...I was just trying to console him a bit with mentioning the H4350 theory may be true. We know it...

    Sep 18, 2017 at 9:21 AM
  7. Ledd Slinger liked joshb's post in the thread What now?.

    and stop shooting. Find another hobby. You'll save a lot of money !

    Sep 17, 2017 at 10:51 PM
  8. Ledd Slinger replied to the thread 6.5 Creed velocities with 140/142's?.

    Like stated before. This 24" barrel theory may be correct with H4350 and 140gr bullets. But I'd be willing to bet with RL23 or RL26 you...

    Sep 17, 2017 at 10:48 PM
  9. Ledd Slinger replied to the thread Anyone sell a cheap 30mm scope ring lapping rod?.

    I would love to compare the runout on concentricity of your wooden dowel vs my steel lapping rod. The dowel probably gets lapped into a...

    Sep 17, 2017 at 10:39 PM
  10. Ledd Slinger replied to the thread 6.5 Creed velocities with 140/142's?.

    And there it is. No actual experience. Don't believe everything you read. I only said I may agree with you in a previous post because...

    Sep 17, 2017 at 9:04 PM
  11. Ledd Slinger replied to the thread Anyone sell a cheap 30mm scope ring lapping rod?.

    It's a waste of time if the rings aren't lapped in alignment with each other. Might even make matters worse. No way on God's green earth...

    Sep 17, 2017 at 9:03 PM
  12. Ledd Slinger replied to the thread Anyone sell a cheap 30mm scope ring lapping rod?.

    Wheeler Engineering is about the most affordable you will find and they are very good quality. Should be able to find just the 30mm set...

    Sep 17, 2017 at 9:02 PM
  13. Ledd Slinger replied to the thread Anyone sell a cheap 30mm scope ring lapping rod?.

    You're joking right?

    Sep 17, 2017 at 8:51 PM
  14. Ledd Slinger replied to the thread Bolt face-Devcon then sand down?.

    I'd have to agree with swd and Xring. Ive worked with Devcon a lot bedding rifles and although it's a great product, I don't think...

    Sep 17, 2017 at 7:31 PM