Dusty, I bought copper ground rod from McMaster Carr. It will make a lot of tips.
2 Suggestions, like Mr Hudson, use fine thread set screws rather than coarse thread, but I find copper tips to be much better than...
I have that same die.
Ooooohhhhhhh!!!!! I understand now!!!!!!
Did I do it right?
Ben is undoubtedly using a Pfluger centrifugal rotary cartridge neck swage.
Something I learned here-
Use the KM or whatever mandrel to set your inside diameter then use a feeler gauge to set your cutter at the...
This topic sponsored by jack daniels
I fireform without a bullet the first time. Brass doesn't shorten and no donut.
I believe that if you want to impress somebody with your group pictures, show 4 or 5 groups on the same piece of paper. That is the best...
I only have 2 40X rimfires left. One was built on the early 722 receiver and the other is modeled after the 700.
"I have a 40XC-KS which I am told is a cut above the rest."
They were produced for civilians to shoot NRA XTC matches.
Im glad you like yours. Thats very good! But having hundreds in my lathe over the years i can assure you there was no magic there....
It is a solid bottom single shot 700. Nothing special was ever done to them from the REMINGTON custom shop before dakota. They are as...
What your Doctor is referring to is the depth of field or distance between the nearest and the furthest objects that are in acceptably...
You need a toolpost winch to move that rig
Separate names with a comma.