BoydAllen's Recent Activity

  1. BoydAllen replied to the thread bumping back.

    There are some things that need to be made clear, up front, in any discussion of neck sizing vs. FL sizing. Not all neck sizing dies are...

    Oct 14, 2019 at 12:25 PM
  2. BoydAllen liked Rich S's post in the thread Concrete shooting bench top.

    C clamp a board across the bench. You can get as much preload as you want. Ive seen several folks do that or use a matt on the bench.

    Oct 14, 2019 at 12:36 AM
  3. BoydAllen liked Dusty Stevens's post in the thread Concrete shooting bench top.

    Wood is only suitable on a shooting bench if its a 2x4 clamped on the front edge to either load a bipod or stop a railgun. Any other...

    Oct 14, 2019 at 12:36 AM
  4. BoydAllen replied to the thread I don't understand this advice or the logic "Never shoot a dry bore"..

    It seems that one thing that has been overlooked in this discussion is whether a bore is really dry after patching out. In the past,...

    Oct 12, 2019 at 1:42 PM
  5. BoydAllen replied to the thread Suggestions needed on FL die adjuster.

    I have the PMA and it works just fine. On the O ring thing, before I had the PMA I used an O ring setup that some of you might want to...

    Oct 9, 2019 at 6:17 PM