Powder Valley Sinclair Int'l Midsouth Shooters Bruno Shooters' Supply Bullets.com Shooting Supplies Lapua Products at Grafs.com Click to Donate to Site
By Clicking HERE to Shop at Amazon.com You Can Help Support the Forum.

Author Topic: New Western Powder LT-32 Initial Chrono Test Results  (Read 5041 times)

Offline speedygonzalez

  • Trade Count: (0)
  • Basic Member
  • *
  • Posts: 20
New Western Powder LT-32 Initial Chrono Test Results
HEY GUYS,
I JUST FINISHED UP MY INITIAL CHRONGRAPH WORK WITH THE NEW LT-32 POWDER AND I HAVE TO SAY I WAS IMPRESSED. I HAVE NOT CONCERNED MYSELF WITH NEW POWDERS, SEEINGS HOW I HAVE ENOUGH "T" TO LAST THE REST OF MY LIFE, BUT I STILL LIKE TO TEST ESPECIALLY FOR MY STUDENTS WHO WILL FOLLOW IN OUR FOOT STEPS INTO THE FUTURE. I HAVE POSTED MY INITIAL CHRONOGRAPH WORK ON FACEBOOK IN A SIDE BY SIDE COMPARISON TO "T". IF YOUR INTERESTED YOU CAN FOLLOW THE LINK BELOW.

http://www.facebook.com/profile.php?id=1309538568&sk=photos#!/media/set/?set=a.2812789321425.2117798.1309538568&type=3


I WILL POST MORE PICTURES AND A VOLUME TO WEIGHT CHART TOMORROW WHEN I GET IT ALL COMPILED. PLUS A LITTLE MORE INFO BELOW FROM WESTERN POWDERS TO BETTER FILL YOU IN ON THE LATEST.

IF YOU WOULD CARE TO SEE THE LARGE READABLE PICTURRE OF THE TARGET YOU MAY EMAIL ME AT.

speedy.godzilla@msn.com

KEEP'EM SMALL,
SPEEDY GONZALEZ

From: Keith Anderson [mailto:Keith@ramshot.com]
Sent: Thursday, February 23, 2012 8:30 AM
To: Gonzalez, Speedy
Subject: RE: L-32



Speedy,

The LT-32 is an exact copy of the original T-32 manufactured in the same plant and on the same machinery as the original. Lou Murdica has been extensively testing it and he tells us it is the easiest powder to tune that he has seen in 40 years. According to Lou, the chamber that everybody was using in the 80's will work with this powder. The bullets do not need to be seated way out in order to get more powder in the case. In testing the powder in our Bond Universal receiver against the origin "T' powder, my S.D.'s were about 30% lower with the new powder versus the "T" powder. Lou and Don Nielson donated 16 pounds of the original T-32 lot of powder for our quality control and that is what the new powder is shot against. All of our powders are allowed to deviate +3% to -5% in pressure from the quality control lot except LT-32 which we cut the deviation percentages in half in order to have the best lot to lot consistency in the industry for this powder. Another advantage of LT-32 is the fact that our Accurate 2015 can be blended with this powder if anyone wants to adjust the burn rate. 2015 is also manufactured on the machinery, has the same geometry but is about 10% slower that LT-32.

Just a note on Hodgdon's 8208. The 8208 that is being brought into the country is not being brought in for the benchrest market as most people believe. It is being brought into the country for military contracts and it just so happened that it worked in the PPC. It is being QC'd for those military contracts not for benchrest shooters. There is more money in the military side of selling powder. I work directly with the company using it for military applications. LT-32 is just the opposite. We developed this powder specifically for the 6mm PPC and it is QC'd in the 6mm PPC.

I can send you a sample if you would like.


Best regards,
Keith Anderson
Western Powders Ballistic Lab
« Last Edit: 11:49 PM, 03/25/12 by speedygonzalez »


Offline Nodak7mm

  • Site $$ Contributor
  • Trade Count: (+21)
  • Ace Member
  • *****
  • Posts: 1416
  • Team Lefse
New Western Powder LT-32 Initial Chrono Test Results
« Reply #1 on: 08:34 PM, 03/23/12 »
  • Reply
  • Interesting read, thanks for sharing Speedy....
    Life is to short for me to take myself too seriously.  I just try to have fun, try to make others smile, laugh at myself daily & really try learn from my mistakes!!  If this sounds way too fou-fou for you, loosen up ya tight a$$!!!

    Rod Vigstol,  Fargo ND

    Offline dirtworks5

    • Site $$ Contributor
    • Trade Count: (+21)
    • Active Member
    • *****
    • Posts: 121
    New Western Powder LT-32 Initial Chrono Test Results
    « Reply #2 on: 10:00 PM, 03/23/12 »
  • Reply
  • Is the new powder going to be temp sensitive like 133?  Is the grain size resemble 322?  You have put a lot of time in this.  Your time and knowledge is appreciated by myself, I cannot speak for others.
    Thanks,
    Vern


    Offline speedygonzalez

    • Trade Count: (0)
    • Basic Member
    • *
    • Posts: 20
    New Western Powder LT-32 Initial Chrono Test Results
    « Reply #3 on: 08:50 AM, 03/24/12 »
  • Reply
  • GOOD MORNING,
    HERE ARE THE REST OF THE PICTURES THAT I PROMISED YOU. IF YOU CLICK THE LINK BELOW AND GO TO MY FACEBOOK PAGE YOU CAN SEE THEM IN ALL THERE GLORY OF IF YOU WOULD LIKE THE FULL BLOWN PICTURES FOR YOUR CLOSER EXAMINATION YOU CAN EMAIL ME AT speedy.godzilla@msn.com AND JUST REQUEST THE FULL SIZE PIC.S


    http://www.facebook.com/media/set/?set=a.2818941435224.2117931.1309538568&type=3


    IT IS YET TO BE SEEN IF THE NEW LT-32 PROVES TO NOT BE AFFECTED BY TEMPERATURE AND HUMIDITY LIKE THE OLD T-322, BUT FROM THESE SHORT TESTS IT VERY MUCH MIMICS MY T-322 OF OLD. MY "T" POWDER WAS ALWAYS A BLESSING TO ME IN THE FACT THAT WHEN I WENT TO A MATCH I DID NOT HAVE THE SAME PROBLEMS EVERYONE ELSE WAS HAVING IN RESPECT TO HAVE TO TUNE UP & DOWN OVER COURSE OF A WEEKEND OR WEEK. I GOT TO SHOT AND CONCENTRATE ON THE CONDITIIONS INSTEAD OF MAKING IT A TUNING COMPETITION. IT WAS ALWAYS KIND OF FUNNY WATCHING EVERYBODY GOING UP AND DOWN ON THEIR POWDERS TRYING TO ACCOMODATE THE CHANGES IN WEATHER AS THE DAYS WENT ON. HOPEFULLY THIS WILL ALLOW ALL TO BECOME BETTER SHOOTERS, BY BEING ABLE TO CONCENTRATE ON SHOOTING AND NOT RE-TUNING EVERYTIME ONE COMES BACK FROM THE BENCH.

    GOOD LUCK & KEEP'EM SMALL,
    SPEEDY GONZALEZ
    « Last Edit: 11:52 PM, 03/25/12 by speedygonzalez »


     

    Recent Classifieds

    DONATE HERE

    Sold Stuff Here? Donations Keep our Classifieds Free.




    Facebook LINK

    Advertise

    CLASSIFIEDS RULES

    All sellers must have a complete Forum profile, including City, State, and VALID email address. All sellers must provide current true identity, phone number and address to buyer on request.

    All sellers must enable their email and private message options.

    Sellers MUST state an asking price for all listed goods, which may be supplemented by a request for offers. This site does not provide auction functionality, so there is no automated procedure to accept, qualify, or rank bids.

    All sellers must mark sold items as "SOLD". And delete your ads when the transaction is complete. A "stickie" explains how to do this.

    All sellers must disclose if the item is posted for sale elsewhere and state that the item is "subject to prior sale."

    Any seller who uses deceptive photos, lies about key components or major defects will have his advert deleted without notice and is subject to being banned from the Forum forever.

    PROHIBITED PRODUCTS

    1. Damaged or bulged barrels (unless they are sold only as salvage metal and are clearly described as "not to be used with live ammunition".)

    2. Loaded ammunition that has been loaded or reloaded by a private party (e.g. NOT factory-loaded ammo).

    3. Hand-mixed powders of any kind, or powder of unknown origin/date/burn rate.

    4. Any actions, rifles, or sound suppressors with damaged or obscured serial numbers.

    5. Scopes with broken internals or broken lenses.

    Commercial Ads
    Commercial businesses which are current, paying sponsors may post Classifieds. These shall be posted in the "Commercial Sales" area ONLY. If you sell products commercially, and are NOT paying for advertising, you are NOT allowed to post Forum classifieds. Companies in violation will be black-balled.

    POLICY VIOLATIONS
    Any member selling/trading any item(s) on this board who accepts monies from another member without sending out the items purchased will be permanently banned from the Forum.